? all specifications are subject to change without notice. conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications. inductors for standard circuits wound/std magnetic shielded nlfv/nlfc series type: issue date: nlfv25 2520[1008 inch]* nlfv32 3225[1210 inch] nlfc453232 4532[1812 inch] * dimensions code jis[eia] september 2011
(1/6) 001-03 / 20110928 / e511_nl_02 all specifications are subject to change without notice. inductors for standard circuits wound/std ? magnetic shielded nlfv series nlfv25 features the product has good heat durability that withstands lead-free compatible reflow soldering conditions. lead-free material is used for the plating on the terminal. the product uses metal terminals, which realize excellent connection reliability. from 1h to 100h, all of the products are available in the e-6 series. this product is in compliance with the rohs directive. other products with specifications that do not include exemption regulations are also available. applications audio-visual equipment including tvs, vcrs and digital cameras. electronic equipment used in communication infrastructures including xdsl and mobile base stations. electronic equipment used in onboard automobile equipment including car audio and ecu systems. other electronic equipment including hdds and odds. specifications recommended soldering conditions reflow soldering flow soldering iron soldering based on the above conditions, use a maximum product temperature of 260c and a maximum accumulated heating time of 10 seconds as a guideline. please contact us for details. product identification (1) series name (2) dimensions (3) packaging style (4) inductance value (5) inductance tolerance (6) lead-free compatible product packaging style and quantities conformity to rohs directive operating temperature range ?40 to +105c [including self-temperature rise] storage temperature range ?40 to +105c 150?c 180?c 255?c 230?c pre-heating 90 to 120s 40s max. 10s max. natural cooling time ( s ) 150?c 170?c 260?c max. pre-heating 60 to 120s 10s max. natural cooling time ( s ) tip temperature 300 to 350c heating time 3 seconds/soldering soldering rod specifications output: 30w tip diameter: 1mm nlfv 25 t- 2r2 m -pf (1) (2) (3) (4) (5) (6) 25 2.5 2.0 1.8mm (l w t) t taping (reel) 1r0 1h 100 10h 101 100h k10% m20% pf conformity to rohs directive, exemption regulations apply ef conformity to rohs directive packaging style quantity taping 2000 pieces/reel conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(2/6) 001-03 / 20110928 / e511_nl_02 all specifications are subject to change without notice. shapes and dimensions/recommended pc board pattern electrical characteristics ? 1 rated current: value obtained when current flows and the temperature has risen to 20c or when dc current flows and the initial value of inductance has fallen by 10%, whichever is smaller. ? 2 : please specify lead-free compatible product, pf (conformity to rohs directive, exemption regulations apply) or ef (conformity to rohs directive) test equipment l, q: hp4194a impedance analyzer(16085a+16093b+tdk tf-1) srf: hp8753c network analyzer rdc: matsushita vp-2941a digital milliohm meter typical electrical characteristics inductance change vs. dc superposition impedance vs. frequency characteristics characteristics inductance (h) inductance tolerance q ref. test frequency l,q (mhz) self-resonant frequency (mhz)min. dc resistance ( ? )20% rated current ? 1 (ma)max. part no. 1 20% 5 7.96 100 0.07 455 nlfv25t-1r0m- ? 2 1.5 20% 5 7.96 80 0.09 350 nlfv25t-1r5m- 2.2 20% 5 7.96 70 0.1 315 nlfv25t-2r2m- 3.3 20% 5 7.96 55 0.2 280 nlfv25t-3r3m- 4.7 20% 5 7.96 45 0.24 210 nlfv25t-4r7m- 6.8 20% 5 7.96 38 0.29 175 nlfv25t-6r8m- 10 10% 10 2.52 32 0.36 155 nlfv25t-100k- 15 10% 10 2.52 28 0.75 130 nlfv25t-150k- 22 10% 10 2.52 16 1 105 nlfv25t-220k- 33 10% 10 2.52 14 1.4 85 nlfv25t-330k- 47 10% 10 2.52 11 1.7 60 nlfv25t-470k- 68 10% 10 2.52 10 3.3 50 nlfv25t-680k- 100 10% 10 0.796 8 4 40 nlfv25t-101k- 2.50.2 20.1 1.80.1 0.5 ( 0.4 ) 1.40.1 1.5 1.0 1.5 1.0 terminal electrode weight:25mg inductor solder land pattern dimensions in mm 1 3 130 10 100 300 3 3000 1000 10000 0.3 0.1 10 100 30 1000 300 100 h 10 h 1 h a l=0.1h c=20000 f test circuit dc universal bridge specimen hp model-4275a or equivalent dc current ( ma ) inductance ( h ) 0.1 1 3 0.3 30 10 100 0.1 0.03 0.01 1 10 3 0.3 100 30 100 h 10 h 1 h frequency ( mhz ) impedance ( k ? )
(3/6) 001-03 / 20110928 / e511_nl_02 all specifications are subject to change without notice. inductors for standard circuits wound/std magnetic shielded nlfv series nlfv32 features the product has good heat durability that withstands lead-free compatible reflow soldering conditions. lead-free material is used for the plating on the terminal. the product uses metal terminals, which realize excellent connection reliability. from 1h to 1000h, all of the products are available in the e-6 series. this product is in compliance with the rohs directive. other products with specifications that do not include exemption regulations are also available. applications audio-visual equipment including tvs, vcrs and digital cameras. electronic equipment used in communication infrastructures including xdsl and mobile base stations. electronic equipment used in onboard automobile equipment including car audio and car navigation systems. other electronic equipment including hdds and odds. specifications recommended soldering conditions reflow soldering flow soldering iron soldering based on the above conditions, use a maximum product temperature of 260c and a maximum accumulated heating time of 10 seconds as a guideline. please contact us for details. product identification (1) series name (2) dimensions (3) packaging style (4) inductance value (5) inductance tolerance (6) lead-free compatible product packaging style and quantities conformity to rohs directive operating temperature range ?40 to +105c [including self-temperature rise] storage temperature range ?40 to +105c 150?c 180?c 255?c 230?c pre-heating 90 to 120s 40s max. 10s max. natural cooling time ( s ) 150?c 170?c 260?c max. pre-heating 60 to 120s 10s max. natural cooling time ( s ) tip temperature 300 to 350c heating time 3 seconds/soldering soldering rod specifications output: 30w tip diameter: 1mm nlfv 32 t- 2r2 m -ef (1) (2) (3) (4) (5) (6) 32 3.2 2.5 2.2mm (l w t) t taping (reel) 1r0 1h 100 10h 101 100h k10% m20% ef conformity to rohs directive packaging style quantity taping 2000 pieces/reel conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(4/6) 001-03 / 20110928 / e511_nl_02 all specifications are subject to change without notice. shapes and dimensions/recommended pc board pattern electrical characteristics ? rated current: value obtained when current flows and the temperature has risen to 20c or when dc current flows and the initial value of inductance has fallen by 10%, whichever is smaller. test equipment l, q: hp4194a impedance analyzer(16085a+16093b+tdk tf-1) or equivalent srf: hp8753c network analyzer or equivalent rdc: matsushita vp-2941a digital milliohm meter or equivalent typical electrical characteristics inductance change vs. dc superposition impedance vs. frequency characteristics characteristics inductance (h) inductance tolerance q ref. test frequency l,q (mhz) self-resonant frequency (mhz)min. dc resistance ( ? )20% rated current ? (ma)max. part no. 1 20% 5 7.96 100 0.06 750 nlfv32t-1r0m-ef 1.5 20% 5 7.96 80 0.07 600 nlfv32t-1r5m-ef 2.2 20% 5 7.96 68 0.09 500 nlfv32t-2r2m-ef 3.3 20% 5 7.96 54 0.11 420 nlfv32t-3r3m-ef 4.7 20% 5 7.96 46 0.13 360 nlfv32t-4r7m-ef 6.8 20% 5 7.96 38 0.17 260 nlfv32t-6r8m-ef 10 10% 10 2.52 30 0.20 250 nlfv32t-100k-ef 15 10% 10 2.52 26 0.30 140 nlfv32t-150k-ef 22 10% 10 2.52 21 0.40 120 nlfv32t-220k-ef 33 10% 10 2.52 17 0.65 95 nlfv32t-330k-ef 47 10% 10 2.52 14 0.85 90 nlfv32t-470k-ef 68 10% 10 2.52 12 1.3 70 nlfv32t-680k-ef 100 10% 25 0.796 10 2.2 55 nlfv32t-101k-ef 150 10% 25 0.796 8 2.9 50 nlfv32t-151k-ef 220 10% 25 0.796 7 5.1 40 nlfv32t-221k-ef 330 10% 25 0.796 5 6.8 35 nlfv32t-331k-ef 470 10% 25 0.796 4 14.5 30 nlfv32t-471k-ef 680 10% 25 0.796 3 18.5 25 nlfv32t-681k-ef 1000 10% 25 0.252 2.4 22.5 20 nlfv32t-102k-ef 3.2 0.2 2.5 0.2 2.2 0.2 0.5 ( 0.4 ) terminal electrode 1.9 0.1 weight: 50mg 2 inductor solder land pattern 1.2 2 1.2 dimensions in mm 10 0.1 1000 100 1 10 100 1000 10000 inductance ( h ) dc current ( ma ) 1 h 4.7 h 10 h 47 h 100 h 330 h 1 h 4.7 h 10 h 47 h 100 h 330 h 0.1 1 100000 1000 10000 10 100 1 10 100 impedance ( ? ) frequency ( mhz )
(5/6) 001-03 / 20110928 / e511_nl_02 all specifications are subject to change without notice. inductors for standard circuits wound/std magnetic shielded nlfc series nlfc453232 features the nlfc series features magnetic shielding and is recom- mended for power supply line applications. the product has good heat durability that withstands lead-free compatible reflow soldering conditions. lead-free material is used for the plating on the terminal. the product uses metal terminals, which realize excellent con- nection reliability. from 1h to 330h, all of the products are available in the e-6 series. it is a product conforming to rohs directive. applications electronic equipment used in communication infrastructures including xdsl and mobile base stations. audio-visual equipment including tvs and vcrs. other electronic equipment including hdds and odds. specifications recommended soldering conditions reflow soldering flow soldering iron soldering based on the above conditions, use a maximum product temperature of 260c and a maximum accumulated heating time of 10 seconds as a guideline. please contact us for details. product identification (1)series name (2)dimensions (3)packaging style (4)inductance value (5)inductance tolerance (6) lead-free compatible product packaging style and quantities conformity to rohs directive operating temperature range ?40 to +105c [including self-temperature rise] storage temperature range ?40 to +105c 150?c 180?c 255?c 230?c pre-heating 90 to 120s 40s max. 10s max. natural cooling time ( s ) 150?c 170?c 260?c max. pre-heating 60 to 120s 10s max. natural cooling time ( s ) tip temperature 300 to 350c heating time 3 seconds/soldering soldering rod specifications output: 30w tip diameter: 1mm nlfc 453232 t- 2r2 m - pf (1) (2) (3) (4) (5) (6) 453232 4.5 3.2 3.2mm (l w t) t taping (reel) 1r0 1h 100 10h 101 100h k10% m20% pf lead-free compatible product packaging style quantity taping 500 pieces/reel conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(6/6) 001-03 / 20110928 / e511_nl_02 all specifications are subject to change without notice. shapes and dimensions/recommended pc board pattern electrical characteristics ? rated current: value obtained when current flows and the temperature has risen to 20c or when dc current flows and the initial value of inductance has fallen by 10%, whichever is smaller. test equipment l, q: yhp4194a impedance analyzer+yhp16085a+yhp16093b+tf-1, or equivalent srf:hp8753c network analyzer (zin=zout=50 ? ), or equivalent rdc:matsushita vp-2941a digital milliohm meter, or equivalent typical electrical characteristics inductance change vs. dc superposition characteristics impedance vs. frequency characteristics inductance (h) inductance tolerance q ref. test frequency l, q (mhz) self-resonant frequency (mhz)min. dc resistance ( ? )30% rated current ? (ma)max. part no. 1 20% 10 7.96 200 0.05 800 nlfc453232t-1r0m-pf 1.5 20% 10 7.96 130 0.06 700 nlfc453232t-1r5m-pf 2.2 20% 10 7.96 80 0.07 600 nlfc453232t-2r2m-pf 3.3 20% 10 7.96 45 0.09 460 nlfc453232t-3r3m-pf 4.7 20% 10 7.96 35 0.1 400 nlfc453232t-4r7m-pf 6.8 20% 10 7.96 28 0.14 300 nlfc453232t-6r8m-pf 10 10% 10 2.52 22 0.21 250 nlfc453232t-100k-pf 15 10% 10 2.52 20 0.3 200 nlfc453232t-150k-pf 22 10% 10 2.52 18 0.46 170 nlfc453232t-220k-pf 33 10% 10 2.52 14 0.63 140 nlfc453232t-330k-pf 47 10% 10 2.52 11.5 0.85 120 nlfc453232t-470k-pf 68 10% 10 2.52 10 1.2 100 nlfc453232t-680k-pf 100 10% 10 0.796 8 1.7 90 nlfc453232t-101k-pf 150 10% 10 0.796 7 2.3 65 nlfc453232t-151k-pf 220 10% 10 0.796 5.5 3.8 55 nlfc453232t-221k-pf 330 10% 10 0.796 4 6 45 nlfc453232t-331k-pf 100 c0.5 r0.2 4.5 0.3 3.2 0.2 3.2 0.2 0.5 terminal electrode ( 0.6 ) 2.6 0.1 weight: 180mg dimensions in mm 2.8 inductor solder land pattern 3 1.5 1.5 1 3 dc current ( ma ) 10 100 300 30 3000 1000 10000 0.3 0.1 10 100 30 1000 300 inductance ( h ) 330 h 100 h 47 h 10 h 4.7 h 1 h a l=5h c=20000 f test circuit dc universal bridge specimen yhp model-4275a or equivalent 1 3 frequency ( mhz ) 0.1 1 3 0.3 30 10 100 0.1 0.03 0.01 10 0.3 100 30 impedance ( k ? ) 330 h 100 h 47 h 10 h 4.7 h 1 h
|
